Close

Predator™ Series Packaged Heating and Cooling Units


Capacity: 3 to 12.5 Tons
Efficiency: 14 SEER/11.8 EER
Features
Downloads
  • Meets or exceeds ASHRAE Standard 90.1 and is ENERGY STAR® qualified.
  • All model sizes share a common footprint for on-site flexibility.
  • Smart Equipment™—The new generation of UPG control is provided as a standard component on the Predator™ packaged unit that provides the reliability and ease of use found in Smart Equipment™.
  • Installation time and costs are reduced by easy power and control wiring. All units are factory-wired, piped, charged and tested prior to shipment. Factory-installed options further reduce installation costs.
  • Gas and electric utility knockouts are provided on unit side and bottom for easy connections.
  • Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
  • Wide range of indoor airflows using belt-drive blowers.
  • Durable finish made of powder-painted, galvanized steel meets 1,000-hour salt-spray test demands.
  • Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.
  • Compressor is internally protected against high pressure and temperature.
  • Heat exchangers use corrosion-resistant, aluminized steel tubular construction for durability and long service life.
  • Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
  • Complete line of field-installed accessories, including propane and high-altitude conversion kits, motorized dampers, economizers, power exhaust and single- and dual-enthalpy sensors are available.
  • Condenser coils are constructed of MicroChannel aluminum tubing and aluminum fins for durability and long-lasting efficient operation.
  • Evaporator coils are constructed with grooved copper tubes and enhanced aluminum fins to improve heat transfer.
  • Constant (CV), multiple speed (IntelliSpeed™) and variable air volume (VAV) option featuring a variable frequency drive (VFD) is available in several different factory and field-installed configurations to accommodate zoning needs (6-1/2 – 12-1/2 ton only).
Model ZF078-150
SEER/IEER range 12-14.4 SEER
EER 10.8 - 11.2 EER
Power Source Gas/Electric Electric/Electric
Tonnage 6-12.5
Type AC
Model ZH037-061
SEER/IEER range 14 SEER
EER 11.8 EER
Power Source Electric/Electric
Tonnage 3-5
Type AC
Model ZH078-150
SEER/IEER range 12.0-14.8 SEER
EER 11.5 - 11.7 EER
Power Source
Tonnage 6.5-12.5
Type AC
Model ZJ037-061
SEER/IEER range 12.8-15.2 SEER
EER 11.6 - 12.2 EER
Power Source Gas/Electric Electric/Electric
Tonnage 3-5
Type AC
Model ZJ078-150
SEER/IEER range 12.8-15.2 SEER
EER 11.6 - 12.2 EER
Power Source
Tonnage 6.5-12.5
Type AC
Model ZT037-061
SEER/IEER range 15.95-17.2 SEER
EER 13.05-14.0 EER
Power Source Gas/Electric Electric/Electric
Tonnage 3-5
Type AC
Model ZR037-061
SEER/IEER range 14.7 SEER
EER 12.2 EER
Power Source Gas/Electric Electric/Electric
Tonnage 3-5
Type Reheat
Model ZR078-150
SEER/IEER range 11.4-14.0 SEER
EER 11.2-12.2 EER
Power Source
Tonnage 6.5-12.5
Type Reheat
Contact your local YORK dealer